Elkhart Pinball Inc.

What Was On The Rotisserie

   1987 Williams F-14 Tomcat (Customers)

This game is not Elkhart Pinball’s. This game belongs a customer to be given a complete check

up and Reconditioning, we will remove all playfield plastic, ramps, light bulbs and posts, clean everything removed in the ultrasonic cleaner, clean the playfield, polish it, and then reassemble the game, check all switches for proper adjustment, install new light bulbs, check all the bulbs to make sure there are no shorts in the lamp matrix. Then we will reassemble the ramps, playfield plastic set and check switches and lamps again to make sure they work properly. Repaired Switch Matrix Column 3, Broken Wire to Death Kick Back coil, 3 Flasher Resistors.

New parts installed 4 Full Flipper Assemblies, 1 Flipper Bats, 1 Pop Bumper Cap, All Coil Sleeves, 2 Red Targets, and Ball Gate.

3 AAA Batteries removed and converted over to a NVRAM by www.pinitech.com

These modules use CYPRESS F-RAM nvram ICs rated at 151-year data retention & 100 trillion reads/writes. So no more changing or leaking batteries very great idea.

We can do as little or as much to a pinball machine, what ever the customer wants.