Elkhart Pinball Inc.

What Is On The Rotisserie

1987 Williams Fire!

Customers

This game is not Elkhart Pinball’s. This game belongs a customer to be given a complete check

up and Reconditioning, we remove all playfield plastic, ramps, light bulbs and posts, clean everything removed in the ultrasonic cleaner, clean the playfield, polish it, and then reassemble the game, check all switches for proper adjustment, then we reinstalled all the customers old bulbs, then checked to make sure there are no shorts in the lamp matrix. Then we will reassemble the ramps, playfield plastic and check switches and lamps again to make sure they work properly.

New parts installed 2 Rebuild Flipper Kits, All coil sleeves replaced.

Regrained and polished all ball guides.

Repaired coil relay going to Fire motor and lights.

Repaired broked plastic's.

Removed all the pre-warming capacitors to all the (#67)flasher LED bulbs.

Removed the wiring hack going to the knocker and bell on top of head. (Theywere wired together on the knocker transistor, and the bell ringing wires were cut on harness and left exposed.)

Repaired the bell ringer mec on the Fire bell on top.

We can do as little or as much to a pinball machine, what ever the customer wants.